Si-TPV e rala lisebelisoa tsa hau tsa silky touch le ho hanyetsa matheba,
e babatsehang pokello ea litšila khanyetso, ho tshoaroa ka silika le letlalo,
SILIKE Si-TPV® 2150-55A thermoplastic elastomer ke patented vulcanized vulcanized thermoplastic silicone-based elastomer e entsoeng ka theknoloji e khethehileng e lumellanang ho thusa rabara ea silicone e qhalakantsoeng TPO ka ho lekana joalo ka likaroloana tse 2 ~ 3 tsa micron tlas'a microscope. Lisebelisoa tseo tse ikhethang li kopanya matla, ho tiea le ho hanyetsa abrasion ea elastomer efe kapa efe ea thermoplastic e nang le thepa e lakatsehang ea silicone: bonolo, maikutlo a silky, khanya ea UV le khanyetso ea lik'hemik'hale tse ka sebelisoang hape le ho sebelisoa hape mekhoeng ea setso ea tlhahiso.
Si-TPV® 2150-55A e ka tlamahano e ntle haholo ho TPE le likaroloana tse tšoanang tsa polar tse kang PP, PA, PE, PS, joalo-joalo… felisa liindasteri tsa TPE, tsa TPE ……
Ntho ea teko | Thepa | Yuniti | Sephetho |
ISO 37 | Elongation at Break | % | 590 |
ISO 37 | Tensile Matla | Mpa | 6.7 |
ISO 48-4 | Shore A Hardness | Shore A | 55 |
ISO 1183 | Botenya | g/cm3 | 1.1 |
ISO 34-1 | Matla a Kgapha | kN/m | 31 |
- | Modulus ea Elasticity | Mpa | 4.32 |
- | MI(190℃,10KG) | g/10 mets | 13 |
- | Qhibiliha Mocheso Optimum | ℃ | 220 |
- | Mold Mocheso Optimum | ℃ | 25 |
E lumellana le SEBS, PP, PE, PS, PET, PC, PMMA, PA
1. Fana ka bokaholimo ka Uniqueho tshoaroa ka silika le letlalo, maikutlo a bonolo a matsoho a nang le thepa e ntle ea mochine.
2. Ha e na polasetiki le oli e nolofatsang, ha ho na kotsi ea ho tsoa mali / e khomarelang, ha e na monko o monate.
3. UV e tsitsitseng le khanyetso ea lik'hemik'hale e nang le tlamahano e babatsehang ho TPE le li-substrates tse tšoanang tsa polar.
4. Fokotsa adsorption ea lerōle, ho hanyetsa oli le ho fokotsa litšila.
5. Ho bonolo ho e etsa, 'me ho bonolo ho sebetsana le eona.
6. Khanyetso e tšoarellang ea abrasion & khanyetso ea silakanya & khanyetso ea mongoo.
7. Ho feto-fetoha ha maemo ho babatsehang le ho hanyetsa kink.
…..
Ka ho toba ente molding.
• Tataiso ea Ts'ebetso ea Ente ea Mold
Nako ea ho omisa | Lihora tse 2-4 |
Ho omisa Mocheso | 60–80°C |
Feed Zone Temperature | 180–190°C |
Mocheso oa Sebaka sa Bohareng | 190–200°C |
Mocheso oa Sebaka sa Pele | 200–220°C |
Mocheso oa Nozzle | 210–230°C |
Qhibiliha Mocheso | 220°C |
Mocheso oa hlobo | 20–40°C |
Lebelo la Ente | Med |
Maemo ana a ts'ebetso a ka fapana ho ea ka lisebelisoa le mekhoa ea motho ka mong.
• Tšebetso ea bobeli
E le thepa ea thermoplastic, thepa ea Si-TPV® e ka etsoa ea bobeli bakeng sa lihlahisoa tse tloaelehileng.
• Ente Molding Khatello
Khatello ea ho tšoara haholo e itšetlehile ka geometry, botenya le sebaka sa heke ea sehlahisoa. Khatello ea ho ts'oara e lokela ho behoa ho boleng bo tlaase qalong, 'me butle-butle e eketsehe ho fihlela ho se na mefokolo e amanang le sehlahisoa se entsoeng ka ente. Ka lebaka la thepa ea rekere ea thepa, khatello e feteletseng ea ho tšoara e ka baka deformation e tebileng ea karolo ea heke ea sehlahisoa.
• Khatello ea mokokotlo
Ho kgothaletswa hore khatello e ka morao ha screw e khutlisetsoa morao e lokela ho ba 0.7-1.4Mpa, e ke keng ea netefatsa feela ho tšoana ha ho qhibiliha ho qhibiliha, empa hape ho netefatsa hore thepa ha e senyehe haholo ke ho kuta. Lebelo le khothaletsoang la screw ea Si-TPV® ke 100-150rpm ho netefatsa ho qhibiliha ho felletseng le polasetiki ea thepa ntle le ho senyeha ha thepa ho bakoang ke ho futhumatsa ha shear.
1. Lihlahisoa tsa Si-TPV elastomer li ka etsoa ho sebelisoa mekhoa e tloaelehileng ea tlhahiso ea thermoplastic, ho kenyelletsa le overmolding kapa co-molding le li-substrates tsa polasetiki tse kang PP, PA.
2. Maikutlo a silky ka ho fetisisa a Si-TPV elastomer ha a hloke mehato e eketsehileng ea ho sebetsa kapa ea ho roala.
3. Maemo a ts'ebetso a ka fapana ka lisebelisoa le mekhoa ea motho ka mong.
4. Ho omisoa ha desiccant desiccant dehumidifying ho kgothaletswa bakeng sa ho omisa hohle.
25KG / mokotla, mokotla oa pampiri oa matsoho o nang le mokotla o ka hare oa PE
Lipalangoang joalo ka lik'hemik'hale tse seng kotsi. Boloka sebakeng se phodileng le se nang le moya o motle.
Litšobotsi tsa mantlha li lula li le teng ka likhoeli tse 12 ho tloha ka letsatsi la tlhahiso haeba li bolokiloe sebakeng se khothaletsoang. Ho thusa baetsi ba lisebelisoa tse aparoang ka bohlale ho rarolla mathata habonolo, re thehile sehlopha se secha sa vulcanizate thermoplastic Silicone-based elastomers. (Si-TPV) Lintho tse bolokang tikoloho. Melemo bakeng sa lisebelisoa tse aparoang, Sefahleho sa letoto la Si-TPV®2150 se na le litšobotsi tsa ho ts'oara hamonate, mofufutso o motle le ho hanyetsa letsoai, ha ho na ho khomarela ka mor'a ho tsofala, 'me ho fana ka khanyetso e ntle ea ho hlaba le ho hanyetsa ho apara. Letoto la Si-TPV®2150 le ka sebelisoa haholo mafapheng a amanang le ts'ebeliso joalo ka lisebelisoa tse aparoang ka bohlale, lithapo, lihlahisoa tsa elektroniki tsa dijithale le mekotla ea liaparo.
$0
limaraka tsa Silicone Masterbatch
limaraka Powder ea Silicone
limaraka Anti-scratch Masterbatch
limaraka Anti-abrasion Masterbatch
limaraka tsa Si-TPV
limaraka tsa Silicone Wax