Litaba

Ho Ntša Filimi ea Polyolefin Blown Extrusion ke Eng?

Ho ntsha filimi e butsoeloang ka polyolefin ho sebelisoa haholo ho hlahisa lifilimi tsa ho paka bakeng sa lijo, thepa ea bareki, li-liner tsa indasteri, lifilimi tsa temo le liphutheloana tse sireletsang.

Tlhahiso ea lifilimi tsa sejoale-joale tse phatlohang e ntse e hloka lifilimi tse tšesaane tsa gauge, sekhahla se phahameng sa tlhahiso, boleng bo boreleli ba bokaholimo, le extrusion e tsitsitseng ea nako e telele.

Ho fihlella dipheo tsena, diprosesa hangata di sebedisa LLDPE, mLLDPE, LDPE, le metallocene polyolefins, tse behang ditlhoko tse hodimo hodima bokgoni ba ho sebetsa ba ho ntsha dikhemikhale.

Mathata a Tloaelehileng a Ts'ebetso ho Blown Film Extrusion

Ha lebelo la tlhahiso le ntse le eketseha 'me botenya ba filimi bo fokotseha, bahlahisi ba lifilimi tse phatlohileng hangata ba kopana le:

× Qhibilihisa ho robeha (letlalo la shaka) ka lebelo le phahameng

×Phallo e fokolang ea ho qhibiliha le boitšoaro bo sa tsitsang ba lipululana

×Ho bokellana ha ditshila haholo le ho hlwekiswa kgafetsa

× Ho eketseha ha torque le khatello ea extrusion

×Ho itšetleha haholo ka lithuso tsa ho sebetsana le PPA tse nang le fluorine

Mathata ana a fokotsa katleho ea tlhahiso, ponahalo ea bokaholimo le botsitso ba ts'ebetso.

Ke Hobane'ng ha Li-PPA tse Fluorinated li Nkeloa Sebaka Litšebelisong tsa Filimi e Blown?

Lisebelisoa tsa ho sebetsana le polymer tse nang le fluorine li 'nile tsa sebelisoa ka tloaelo ho ntlafatsa phallo ea ho qhibiliha le ho thibela ho robeha ha ho qhibiliha.

Leha ho le jwalo, kgatello e ntseng e hola ya taolo ya PFAS, haholoholo dipaketeng le ditshebedisong tsa ho ikopanya le dijo, e kganna indasteri ho ya mekgweng e meng e se nang fluorine.

Bahlahisi ba lifilimi ba ntseng ba phatloha ba ntse ba hlokoa ho leka-lekanya:

•Tshebetso ea extrusion ea lebelo le phahameng

•Ho latela melao le botsitso

•Tšepahalo ea tlhahiso ea nako e telele

Tharollo ea PPA ea SILIKE PFAS-Free bakeng sa Blown Film Extrusion

SILIKE SILIMER PFAS-Mahala PPA Masterbatchkethuso ea ho sebetsana le ts'ebetso e se nang fluorinee ntshetswa pele bakeng sa ho ntsha polyolefin, ho kenyeletswa le ditshebediso tsa filimi e phatlohileng.

Ka boemo bo tlase ba ho eketsa, SILIMER e thusa bahlahisi ho fihlella extrusion e tsitsitseng, e nang le tlhahiso e phahameng ntle le PFAS.

Melemo ea Bohlokoa ea lithuso tsa ts'ebetso tse se nang SILIKE PFAS ho Blown Film Extrusion:

√Phallo e ntlafalitsoeng ea ho qhibiliha le botsitso ba ts'ebetso

√Ho felisa ka katleho ho robeha ha qhibilihisoa (letlalo la shaka)

√Ho bokellana ha die ho fokotsehile le ho hlwekisa nako e telele

√Torque le khatello e tlase ea extrusion

√Boleng ba filimi bo boreleli le bo ts'oanang

Li-PPA tsa SILIMER SILIMER PFAS-Free li fana ka mokhoa o mong o sebetsang ho feta li-PPA tse nang le fluorine ha ka nako e ts'oanang li tšehetsa lipheo tse tsitsitseng tsa ho paka.

Likopo tse Tloaelehileng

•Lifilimi tse bululetsoeng ke Polyolefin (PE / LLDPE / mLLDPE)

•Lifilimi tsa ho paka tse tšesaane

•Lijo le liphutheloana tsa indasteri

•Lifilimi tsa temo le tsa tšireletso

Hobaneng o ka Khetha SILIKE joalo ka Mofani oa PPA ea se nang PFAS?

With over 20 years of expertise in silicone-modified polymer additives, SILIKE offers PFAS-free processing solutions customized to address the challenges of modern blown film extrusion. If you are seeking an alternative to fluorinated PPA, contact amy.wang@silike.cn to obtain our Blown film processing aid – Fluorine-free processing aid.                           Or,etela Webosaete:www.siliketech.com to ithute haholoanyane kaSILIMER PFAS le litharollo tse ling tse se nang fluorine!

Lipotso Tse Botsoang Khafetsa Mabapi le ho Sibolla Filimi ea Blown (PPA e se nang PFAS)

Potso:Ho robeha ha qhibilihiso ho ka felisoa joang ha ho phatloha filimi e phatlohileng?

Karabo:

Ho robeha ha qhibilihiso ha filimi e phatlohang ho bakwa ke kgatello e phahameng ya ho kgaola leboteng la die, haholoholo ka sekgahla se phahameng sa tlhahiso.

Ho sebelisathuso ea ho sebetsana le polymer tkatiba e fokotsa khohlano e qhibilihang ho fihlela e shoa ke tharollo e sebetsang.

Bahlahisi ba bangata hona joale ba sebelisa li-PPA tse se nang PFAS, tse kang SILIKE SILIMERSILIKE SILIMER PPA e se nang Fluorine,ho felisa ho robeha ha qhibilihiso ha ho ntse ho bolokwa melao ya taolo.

Potso: Ke hobane'ng ha lithuso tsa ts'ebetso li hlokahala meleng ea lifilimi tsa sejoale-joale tse phatlohileng?

Karabo:

Tlhahiso ea lifilimi tsa sejoale-joale tse butsoitsoeng e hloka lifilimi tse tšesaane le tlhahiso e phahameng, hangata ho sebelisoa mLLDPE le metallocene polyolefins.

Lisebelisoa tsena li ntlafatsa matla empa li fokotsa botsitso ba ts'ebetso, e leng se etsang hore lithuso tsa ts'ebetso li be tsa bohlokoa bakeng sa ho ntša lintho ka mokhoa o tsitsitseng.

Potso: Ke mokhoa ofe o motle ka ho fetisisa oa PFAS o se nang fluorine ho feta PPA e nang le fluorine ho extrusion ea filimi e phatlohileng?

Karabo:

Li-PPA tse se nang PFAS tse thehiloeng theknolojing ea polymer e fetotsoeng ke silicone li sebelisoa haholo e le mekhoa e meng.

SILIKE SILIMER PFAS-Free PPA e etselitsoe ho ntša filimi e phatlohileng ka polyolefin 'me e fana ka ts'ebetso e tsitsitseng, e nang le tlhahiso e phahameng.

Potso: Do Li-PPA tse se nang PFASe ama thepa ea mechini ea filimi e phatlohileng?

Karabo:

Tjhe. Li-PPA tse se nang PFAS tse hlophisitsoeng hantle ha li ame matla a filimi hampe, ts'ebetso ea ho koala, kapa ponahalo.