Litaba

Ho Shebana le ho Haha ha Die, Libaka tse Mabe, le Motlakase o Tlase?PFAS-Ha e na thusoMokhoa oa ho e rarolla.

Liphaephe tsa HDPE le MDPE li theha motheo oa meralo ea motheo ea metsi ea sejoale-joale — li ​​fana ka ts'ebetso e sireletsehileng, e tšoarellang le e nang le khatello e phahameng.

Leha ho le jwalo nakong ya ho ntsha motlakase, bahlahisi hangata ba tobana le mathata a phetoang: ho bokellana ha motlakase ka die, ho robeha ha metsi ka ho qhibilihisa, kgatello e sa tsitsang ya mokokotlo, le ho fela ha bokahodimo bo sa tsitsang. Mathata ana ha a ame ponahalo ya phaephe feela empa hape a fokotsa lebelo la mothapo, a eketsa nako ya ho se sebetse ha mothapo, le ho eketsa ditjeo tsa matla.

Ka mashome a lilemo, lithuso tsa ts'ebetso tse thehiloeng ho fluoropolymer tse kang 3M™ Dynamar™ PPA li 'nile tsa sebelisoa ho fokotsa liphephetso tsena. Leha ho le joalo, ka lithibelo tse ntseng li eketseha tsa PFAS lefatšeng ka bophara, indasteri ea liphaephe e hloka ka potlako mokhoa o mong o sa fluorine, o tsitsitseng - o bolokang kapa o fetang maemo a teng a ts'ebetso.

Hobaneng Indasteri ea Liphaephe e Fetela ka Nģ'ane ho Li-PPA tse Thehiloeng ho PFAS

Lintho tsa PFAS (Per- le Polyfluoroalkyl Substances) li ntse li hlahlojoa ka hloko ka lebaka la ho phehella ha tsona tikolohong le likotsi tse ka bang teng bophelong.
Ho ya ka Molao wa EU REACH le US EPA 2024 Roadmap, dithuso tsa ho sebetsana le dikokwana-hloko tse nang le PFAS di tla tobana le dithibelo tse tswelang pele kapa ditlhoko tse thata tsa ho tlaleha.
Bakeng sa bahlahisi ba romelang liphaephe kantle ho naha Europe kapa Amerika Leboea, ho latela melao ha ho sa le boikhethelo - ke tlhokahalo ea 'maraka.

Ka lebaka leo, bahlahisi ba liphaephe ba batla ka mafolofolo lithuso tsa ho sebetsana le polymer tse se nang PFAS tse ka fanang ka boreleli le botsitso bo tšoanang ba extrusion, ntle le kotsi ea tikoloho kapa botumo.

Ho hlahisa letoto la SILIKE SILIMER — E Hloekileng ka 100%,PPAS-Free, Silicone-Based PPA

Letoto la SILIMER le ntshetsweng pele ke Chengdu SILIKE Technology, le emela katleho e kgolo dithusong tsa ho sebetsana le ho ntsha dintho tse tswang kantle.

Ho fapana le li-PPA tsa fluoropolymer,SILIMERli-additives tsa polasetiki tse thehiloeng ho silicon li thehiloe holim'a sebopeho sa limolek'hule tsa copolysiloxane tse fetotsoeng hantle, tse kopanyang matla a tlase a bokaholimo ba silicone le lihlopha tse fetotsoeng polar tse fallelang ka mafolofolo holim'a tšepe.

Hang ha li le leboteng la die, limolek'hule tsena li etsa lera le tsitsitseng la ho tlotsa, li fokotsa khohlano e qhibilihang, li tsitsisa khatello ea ho shear, le ho fokotsa khatello ea die - tsohle ntle le ho sebelisa likarolo tsa fluorine.

JoangLithuso tsa ho sebetsana le polymer tse se nang PFAS (PPAS) tsa letoto la SILIMER (PPAS)Mesebetsi: Saense e ka Morao ho Ts'ebetso e se Nang Matlo ea PFAS

Rarolla Mathata a ho Ntša Liphaephe ka Litharollo tsa PPA tse se nang Fluorine tsa SILIKE - Litlatsetso tsa Polymer tse se nang Fluorine

Hangata li-PPA tse se nang SILIMER PFAS li kopanngoa ho ba masterbatch 'me li eketsoa ka tekanyo e tlase (500–1000 ppm) ho litsamaiso tsa HDPE, MDPE, LLDPE, LDPE, PP, kapa PERT.

Esita le ka bongata bo bonyenyane, li fana ka lintlafatso tse kholo tsa ts'ebetso:

Phallo e boreleli ea polymer le ho tšoana ha ho qhibiliha

Khatello ea mokokotlo le torque e fokotsehileng

Ho fedisa letlalo la shaka le marotholi a shoang

Mekhahlelo e telele ea ho hloekisa le lebelo le tsitsitseng la mola

Tlhahiso e phahameng le tšebeliso e tlase ea matla

Liphetho tse netefalitsoeng tsaLisebelisoa tsa ho Hlophisa tsa Plastiki tse se nang FluorineLitekong tsa ho Ntša Liphaephe

Ho ya ka maikutlo a bareki, diphetho tsa bona tsa diteko tsa ka hare di bontsha hore kamora ho sebedisaSILIMER PFAS-PPA e se nang PPAS, khatello ea die e fokotseha ka 10–20%, bokaholimo ba extrusion bo fetohae boreleli ebile e tšoana haholoanyane, lebelo la mola le eketseha ka10–15%, tšebeliso ea matla e fokotsehile ka5–8%, lepotoloho ea ho hloekisa lisebelisoa e atolosoa ho fihlela makhetlo a mararoho feta pele.

Sesebelisoa se seng sa PFAS SILIMER 9400— E etselitsoe ho Ntša Phaephe ea HDPE le MDPE

Ka hare ho lelapa la SILIMER, SILIMER 9400 e hlahella e le sehlomathiso sa PPA se se nang fluorine se entsoeng ka ho khetheha bakeng sa mela ea ho ntša liphaephe tsa HDPE le MDPE.

E fana ka ho tlotsa ho ikhethang le botsitso ba ts'ebetso tlas'a maemo a phahameng a ho kuta, e netefatsa hore e shoa e hloekile, e na le phallo e phahameng, 'me e na le qetello e ntle ea bokaholimo - ha tsohle li ntse li se na fluorine ka 100% 'me li latela ka botlalo lithibelo tsa lefats'e tsa PFAS.

Ho fetohela ho extrusion e se nang PFAS ha ho sa bolela ho beha tshebetso kotsing.

Ka SILIKE SILIMER Series pfas free ppa, e leng mefuta e meng e latelang e thehilweng ho silicone ho ena le fluoropolymer PPAs/PTFE, bahlahisi jwale ba ka fihlella tlhahiso e potlakileng, di-cleaner dies, le ho latela melao ka botlalo - tsohle di le ka hara sistimi e tsitsitseng, e sebetsang hantle haholo ya ho sebetsana le disebediswa.

Litharollo tsa SILIMER PFAS-Free PPA li fetola tlhahiso ea liphaephe tsa HDPE le MDPE ka ho sebetsana le liphephetso tsa ts'ebetso le liphoso tsa bokaholimo - ho kenyeletsoa ho felisoa ha ho robeha ha qhibilihisoa (letlalo la sharkskin), phallo e ntlafalitsoeng ea qhibilihisoa, le boreledi bo ntlafetseng ba bokaholimo bakeng sa liphaephe tse felileng tsa boleng bo holimo.

Ikopanye le SILIKE kajeno ho ntlafatsa ts'ebetso ea hau ea polymer le ho ntlafatsa ts'ebetso le botle ba litsamaiso tsa hau tsa ho ntša liphaephe.

Also, you can reach out directly at amy.wang@silike.cn or visit www.siliketech.comho hlahloba ditharollo tsa rona tsa diphaephe tse eketsang tikoloho.