Ka polyethylene (PE) extrusion ea filimi, die buildup le li-deposit tse nang le carbonized ke liphephetso tse tloaelehileng tse fokotsang katleho ea tlhahiso, ho senya boleng ba filimi, le ho eketsa nako ea ho theoha. Mathata ana a atile haholo ha ho sebelisoa li-masterbatches tse nang le thepa e mpe ea ho theola kapa botsitso bo sa lekaneng ba mocheso.
Ho utloisisa lisosa tsa metso le ho kenya ts'ebetsong litharollo tse sebetsang - joalo ka ho tseba hore na ke li-additives life tse ka thibelang ho bokellana ha filimi ea PE - ho ka thusa bahlahisi ba liphutheloana, lik'hamphani tsa extrusion tsa lifilimi, le ho kopanya bafani ba thepa ho ntlafatsa tlhahiso, ho fokotsa bofokoli le ho fihlela boleng bo tsitsitseng ba lifilimi.
1. Hobaneng ha Die Buildup e etsahala ho PE Film Extrusion
• Ts'ebetso e Fosahetseng ea Demolding
Ha PE e qhibiliha e haelloa ke lubrication e nepahetseng, polymer e qhibilihisitsoeng e khomarela holim'a metsi. Ha nako e ntse e ea, li-deposit tsena li hlahisa oxidize le carbonize, li theha kaho e manganga.
Mohlala oa Indasteri: Moetsi oa lifilimi o tlalehile ho khomarela ho matla nakong ea lihora tse 3 feela ha a sebelisa PE masterbatch e sa ntlafalang, e leng se bakang ho theoha khafetsa le ho fokotsa katleho ea tlhahiso.
• Thermal Stability e sa lekaneng ea Masterbatches
Hoo e ka bang 80% ea mathata a li-die buildup a bakoa ke botsitso bo tlase ba mocheso oa li-additives ho li-masterbatches, joalo ka li-dispersants kapa li-resin tse tsamaisang. Li-resin tsa boleng bo tlase tse sebelisoang hape kapa li-additives tse sa tsitsang li bola tlas'a mocheso o phahameng le ho kuta, 'me li siea li-deposit tse ntšo kapa tse sootho holim'a lefi.
2. Litharollo tse Atlehang tsa ho Fokotsa Die Buildup
• Mokhoa oa Setso: Li-PPA tse thehiloeng ho Fluoropolymer
Ho tloha khale, li-PPA tse thehiloeng ho fluoropolymer li ile tsa amoheloa ka bongata ho fokotsa ho haha le ho ntlafatsa ts'ebetso ea ts'ebetso ho extrusion ea lifilimi tsa PE.
Leha ho le joalo, mokhoa ona hona joale o tobane le mathata a ntseng a eketseha:
- Likotsi tsa Taolo: Li-PPA tse ngata tse thehiloeng ho fluoropolymer li na le PFAS, tse tlas'a lithibelo tse thata tsa lefats'e.
- Ho se Tiisehe ha Tumellano: Baetsi ba itšetlehileng ka litharollo tse thehiloeng ho PFAS ba tobane le likotsi tse phahameng tsa ho latela melao le mefokolo e ka bang teng ea mebaraka.
- Matšoenyeho a Ts'ebetso: Liindasteri le bareki ba ntse ba batla litharollo tse ling tsa PFAS le tse se nang fluorine tse tsamaellanang le lipheo tsa ts'ebetso.
•Mefuta e meng e se Nang Fluorine: Lithuso tsa ho sebetsa tsa PFAS tse se nang Polymer
Li-PPA tse se nang PFAS ha li tsamaellane le ts'ebetso ea li-PPA tse tloaelehileng tsa Fluorine, empa hape:
√ Ntlafatsa katleho ea tlhahiso ka ho fokotsa nako le ho ntlafatsa phallo ea ho qhibiliha
√ Ntlafatsa boleng ba filimi ka libaka tse boreleli le botenya bo tsitsitseng
√ Ts'ehetso ea ts'ehetso le boqapi boo e seng ba PFAS, bo sa lefelloeng ba PFAS
3. U Batla Tharollo e Nepahetseng ea PFAS-Free PPA?
Na u tobane le liphephetso tsa ho sebetsana le polymer joalo ka die buildup, fracture ea qhibiliha, kapa boleng bo sa tsitsang ba filimi - haho batla ho felisa li-additives tsa fluorine?
Kapa na u batla moetsi ea tšepahalang oa li-PPA tsa mahala tsa PFAS tse fanang ka ts'ebetso e phahameng le ts'ebetso e tsitsitseng?
SILIKE SILIMER PFAS-Free Polymer Processing Aids (PPAs) e etselitsoe ho fana ka litharollo tse tšoarellang, tse sebetsang hantle bakeng sa mela ea sejoale-joale ea extrusion.
• Hobaneng o Khetha Lithuso tsa Ts'ebetso ea SILIKE PFAS-Free Polymer bakeng sa Extrusion ea Filimi?
√ 100% PFAS-Mahala & Fluorine-Mahala: E lumellana ka botlalo le melaoana ea tikoloho ea lefats'e
√ Mefuta e Pharalletseng ea Kopo: E loketse LLDPE, LDPE, HDPE, mLLDPE, PP, le lihlahisoa tse fapaneng tsa lifilimi tsa polyolefin, ho kenyeletsoa extrusion ea filimi e phatlohileng, extrusion ea lifilimi, lifilimi tse ngata, liphutheloana tse bonolo, le lifilimi tse pepeneneng.
√ Ntlafatso e Matla ea Tlhahiso: E fokotsa nako ea ho theoha, e ntlafatsa phallo ea ho qhibiliha, 'me e thibela bofokoli bo holim'a metsi joalo ka letlalo la shaka le ho qhibiliha ho qhibiliha.
√ Boleng ba Filimi bo Khahlehang: E fana ka libaka tse boreleli, botenya bo sa fetoheng, le lihlahisoa tsa ho qetela tsa boleng bo holimo.
√ E ts'ehetsa botsitso: E tsamaisana le litloaelo tsa taolo le litlhoko tsa bareki bakeng sa tharollo ea eco-friendly
•Taba ea Katleho ea Bareki: Moetsi oa Lifilimi oa Ho Paka o Matlafatsa Bokhoni ba ho sebetsa ka SILIKELithuso tsa ho sebetsa tsa PPA tse sa lefelloeng tsa PFAS
Moetsi oa lifilimi ea ka sehloohong oa Asia Boroa-bochabela o ne a tobana le ho hahuoa khafetsa le nako ea ho theoha, likhoele tsa bona tsa extrusion li ne li hloka ho hloekisoa lihora tse ling le tse ling tse 6-8, ho baka litšenyehelo tse phahameng tsa tlhokomelo le boleng bo sa tsitsang ba filimi.
Ho fetohela ho SILIKE PFAS-Free Functional Additives ho thusa melapo e phatlohileng ea lifilimi ho fihlela ts'ebetso e ntlafetseng ea ho thella, ho fokotsa sekhahla sa lefu, tlhahiso ea nako e telele, le ts'ebetso ea tikoloho-tsohle ntle le ho senya ts'ebetso.
Kajeno, bahlahisi ba bangata ba tsepamisitseng maikutlo ho ts'ebetsong ba batla mekhoa e meng e fanang ka melemo e ts'oanang ea ts'ebetso ntle le likotsi tsa tikoloho. Li-PPA tse se nang SILIKE PFAS ke karabo ea sejoale-joale-ho rarolla likoli tsa extrusion joalo ka ho qhibiliha ho qhibiliha le letlalo la shaka ha li ntse li ntlafatsa ts'ebetso le boleng. Ehlile, bahlahisi ba bang ba ntse ba emetse le ho bona. Ka linako tse ling re buisana le bareki ba batlang mekhoa e meng ea PPA e se nang fluorine.Ke Eng e Tlang Pele Moleng oa Hau oa Extrusion? Bakeng sa ts'ebetso ea hau ea ho hlahisa filimi ea PE, ke eng eo e leng ea bohlokoa haholo?
- Boleng ba sefahleho ho khahlisa bareki ba hau
- Lebelo la tlhahiso ho eketsa katleho
- Sireletsa tikoloho le ho hlokomela bophelo bo botle
- Ho latela melao ea ho lula ka pele ho lithibelo tsa PFAS
Ka li-PPA tsa SILIKE PFAS-Mahala, ha ua tlameha ho khetha - u fumana tse 'ne.
→SILIKE: Lilemo tse 20+ tsa Innovation hoLi-additives tse thehiloeng ho Silicone
Ka lilemo tse fetang 20, SILIKE e ikemiselitse ho ntšetsa pele tekatekano lipakeng tsa theknoloji le botsitso. Ho tloha ka 2004, re ipapisitse le li-additives tse thehiloeng ho silicone bakeng sa lipolima le rabara, re theha litharollo tse sebetsang hantle le tse sebetsang hantle lefatšeng ka bophara.
Lisebelisoa tsa rona tsa polasetiki tse thehiloeng ho silicone le lihlahisoa tsa thermoplastic elastomers li fetohile mofani oa tharollo e tala ho pholletsa le liindasteri tse ngata, ho kenyelletsa: Thepa ea lieta, lithapo le lithapo, li-interiors tsa makoloi, liphaephe, lipolasetiki tsa boenjiniere, lifilimi le liphutheloana, li-WPC, ho roala, le tse ling.
Ka silicone e le motheo oa rona le boqapi e le sesebelisoa sa rona, SILIKE e ntse e tsoela pele ho nts'etsapele lisebelisoa tse bopang bokamoso bo tsitsitseng ba polymer.
Na u batla ho fokotsa ho bokellana ha lefu, ho eketsa nako ea ho matha, le ho matlafatsa boleng ba filimi ea polyolefin?
SILIKE’s Non-PFAS Process Aids are your next-generation solution for sustainable and efficient polymer extrusion. Contact Amy Wang: amy.wang@silike.cn, visit www.siliketech.com
Nako ea poso: Sep-18-2025
