Litaba

Na o Loana le Mathata a ho Qhoebeshana ha Bokaholimo, ho Tshabala le ho Sebetsa ka Lipolasitiki?

Tlhahisong ea polasetiki ea sejoale-joale, haholo-holo bakeng saLipolasitiki tsa TPE, TPU, le boenjiniere, tshebetso ya bokahodimo ha e sa le boikgethelo—e ama ka ho toba:

• Boleng ba sehlahisoa

• Bokgoni ba tlhahiso

• Khotsofalo ea bareki

Liphephetso tse Tloaelehileng:

•Khohlano e phahameng ea bokaholimo e bakang ho se tsitse ha ts'ebetso

• Ho se kgone ho kgaba le ho kgopamisa hantle ho fokotsa nako ya bophelo ba sehlahiswa

• Ho silafala ha hlobo ho matla ho lebisang litšenyehelong tsa nako ea ho se sebetse le tsa tlhokomelo

Temoho ea Indasteri:Ho feta 60% ea li-processor tsa polasetiki li khetholla ho tlotsa ha bokaholimo le ho hanyetsa ho tsofala e le tsa bohlokoa bakeng sa boleng le taolo ea litšenyehelo.

Haeba mohala oa hau oa tlhahiso o ntse o e-na le boiphihlelosekgahla se phahameng sa ditshila, dinako tse liehang tsa potoloho, kapa boleng bo sa tsitsang ba bokahodimo, mokhoa oa hau oa ho etsa o kanna oa hloka tharollo e sebetsang ea ho fetola bokaholimo.

Hobaneng ha litlatsetso tsa setso li haella

Li-additi tse tloaelehileng tse kang boka, li-stearate le mafura a nang le limolek'hule tse tlase hangata li baka phapang:

× Katleho e fokolang ea nako e telele (ho falla, ho thunya)
× Botsitso bo fokolang ba mocheso
× Ho se lumellane le li-polymer tse sebetsang hantle
× Tšusumetso e mpe litšobotsing tsa mechini

Li ka ’na tsa rarolla bothata bo bong—empa tsa hlahisa bo bong.

Tharollo — Litlatsetso tse Thehiloeng ho Silicone tse tsoang ho SILIKE

Kamoo Litlatsetso tsa SILIKE Silicone li Sebetsang Kateng

Li-additi tsa silicone tsa SILIKE li fetola boitšoaro ba bokaholimo ba polymer le katleho ea tlhahiso, li fana ka:

√ Ho Ntlafatsa Bokaholimo ba 'Mele

• Ho fokotsa mathata a khohlano le ho thella ha lithupa

√Khanyetso e Ntlafetseng ea ho Roala le ho Ngola

• E theha sebopeho se sireletsang se tšoarellang, se eketsang bophelo ba sehlahisoa

√Bokgoni bo ntlafaditsweng ba ho sebetsana le tshebetso

• Ho lokolloa ha hlobo ka potlako

• Kgatelelo e fokotsehileng ya torque le die

Hobaneng e le SILIKE? Bokgoni bo Pakiloeng ba Phetoho ea Plastiki e Thehiloeng ho Silicone
Botsebi bo Etellang Pele Indastering
Chengdu Silike Technology Co., Ltd. ke moetsi ea ka sehloohong oa thepa e thehiloeng ho silicone, e nang le boiphihlelo ba lilemo tse fetang 20 ba ho kopanya mahlale a silicone le polasetiki le rabara. Lisebelisoa tsa silicone tsa SILIKE li etselitsoe ho fetola polasetiki, ho ntlafatsa ho tlotsa ha bokaholimo ho fana ka liphetho tse boreleli le ts'ebetso e sebetsang haholoanyane.

Potefolio e Felletseng ea Lihlahisoa
SILIKE e fana ka mefuta e mengata ea li-additives tse sebetsang hantle, ho kenyeletsoa:

• Silicone Masterbatch

• Phofo ea Silicone

•Moemeli oa ho thibela ho ngoapa

• Li-masterbatches tse thibelang ho abrasion

•Litharollo tse thellang haholo le tse thibelang ho thibela

• Li-masterbatches tse thibelang ho lla

• Boka ba silicone

• Si-TPV (elastomer e thehiloeng ho silicone e nang le thermoplastic e matla e nang le vulcanized)

•Lithuso tsa ho sebetsana le polymer tse se nang PFAS (PPAS)

• Lisebelisoa le li-modifiers tsa Copolymeric siloxane

• Li-Hyperdispersants

• Lisebelisoa tse sebetsang bakeng sa thepa e bolang

• Ho sebetsana le mafura a ho tlotsa bakeng sa metsoako ya lehong le polasetiki (WPC)

• Li-masterbatches tse nang le phello e matte

…

Ho lumellana ho pharaletseng ho pholletsa le li-polymer
Lisebelisoa tse thehiloeng ho silicone ea SILIKE li tsamaisana le mefuta e mengata ea li-resin, ho kenyeletsoa TPE, TPEE, TPU, PP, PE, PA, EVA, ABS, PC, PC/ABS, PBT, PET, PPS, le PEEK, ntle le ho beha tšebetso ea mechini kapa ea ts'ebetso kotsing.

Litšebeliso tsa Lefatše la 'Nete tsa Litlatsetso tsa SILIKE Silicone ho TPE, TPU, le Liplastiki tse ling

Indasteri ea Likoloi
Bothata: Likarolo tsa kahare tsa likoloi tse kang li-dashboard, liphanele tsa mamati le li-grip hangata li na le mathata a ho ngoatheha le khohlano a amang thepa ea ho ama le boleng ba botle.

Tharollo: Lisebelisoa tsa silicone tse thibelang ho ngoapa tsa SILIKE li fokotsa khohlano, li ntlafatsa ho hanyetsa ho ngoapa, 'me li ntlafatsa maikutlo a kakaretso a ho ama likarolo tsa likoloi.

Indasteri ea Lieta
Bothata: TPE e sebelisoang lithaleng tsa lieta hangata e tobana le ho silafala ha hlobo le khohlano e feteletseng, e leng se liehisang nako ea tlhahiso le ho ama boleng ba sehlahisoa.

Tharollo: Ka ho kenyelletsa li-copolymer tsa silicone polyolefin ka har'a metsoako ea TPE, bahlahisi ba ka fihlella linako tse potlakileng tsa potoloho, ho lokolloa ha hlobo hamolemo, le ho hanyetsa ho khohlela ho ntlafetseng.

Lisebelisoa tsa Elektroniki tsa Bareki
Bothata: Thepa e bonolo e sebelisoang mabokoseng a fono le lihlahisoa tsa bareki hangata e tobana le ho senyeha ha bokaholimo, ho fela le khohlano e kholo.
Tharollo: SILIKE Si-TPV le matte effect masterbatches li fana ka qetello e boreleli, e bonolo, e ntlafatsang botle le ho tšoarella ha sehlahisoa.

…

Lipotso Tse Botsoang Khafetsa (Lipotso Tse Botsoang Khafetsa) Mabapi le Litlatsetso tsa Silicone bakeng sa Plastiki

1. Lisebelisoa tsa silicone li sebelisetsoa eng?
Lisebelisoa tse eketsang silicone li ntlafatsa ts'ebetso ea ts'ebetso le boleng ba bokaholimo ba polasetiki. Li loketse liindasteri tse kang tsa kahare tsa likoloi, metsoako ea cable le terata, lieta, liphaephe tsa polasetiki, lifilimi, masela le lipente.

Melemo ea Bohlokoa:

Ho sebetsana le taba ena: phallo e boreleli ea ho qhibiliha, torque e tlase ea extruder, khatello e fokotsehileng ea die & drool ea die, ho tlatsa hlobo hamolemo, ho lokolloa habonolo, tšebeliso e fokolang ea matla, linako tse khutšoane tsa potoloho.

Bokaholimo: khohlano e tlase, khanyetso e ntlafetseng ea ho ngoapa le ho tsofala, ho thella ho ntlafetseng, le ho ikutloa hantle ha letsoho.

2. Ke hobane'ng ha u khetha li-silicone tse ling ho feta boka kapa li-stearate?
Lisebelisoa tsa silicone li fana ka ts'ebetso e tšoarellang nako e telele le e tsitsitseng:

Ho falla hanyane le ho thunya ho fokolang

Botsitso bo phahameng ba mocheso

E tsamaellana hantle haholo le polasetiki ea boenjiniere

Liphetho tse tsitsitseng ha nako e ntse e ea

3. Na lintho tse eketsang tse entsoeng ka silicone li ka ntlafatsa ho hanyetsa ho ngoapa le ho khohlela?
Ehlile! Litlatsetso tsa silicone li etsa lera le matla la ho tlotsa le fokotsang ho kgohla le ho ntlafatsa ho hanyetsa ho ngoapa.

4. Lisebelisoa tsa silicone tse tlotsang li ntlafatsa ho lokolloa ha hlobo joang?

Lisebelisoa tsa silicone li sebetsa e le litlolo tsa ka hare le tsa kantle, li fokotsa ho khomarela pakeng tsa polymer le hlobo:

Ho fokotsa kapele

Ho fokotsa ho silafatsa hlobo

Linako tse khutšoanyane tsa potoloho

5. Na dikgetho tse se nang PFAS di a fumaneha?

E! SILIKE e fana ka lithuso tsa ho sebetsana le polymer (PPA) tse se nang PFAS tse fihlelang maemo a thata a tikoloho ha ka nako e ts'oanang li netefatsa ts'ebetso e ntle ea ts'ebetso.

Notlolla Tshebetso e Ntle ea Li-Plastics Kajeno!

Hore na o ikemiseditse ho sebetsana hantle, boleng bo hodimo ba bokahodimo, ho ntlafala ha ho ngoatheha le ho hanyetsa ho tsofala, ho fokotseha ha ho silafatsa hlobo, ho ntlafatsa maikutlo a ho ama, kapa tshebetso e nkang nako e telele, lintho tse eketsang siliconeke tharollo ea hau e ntle.

Nka Khato Kajeno:

•Mehlala ea Mahala:Leka li-additives tsa silicone tsa SILIKE lits'ebetsong tsa hau 'me u bone liphetho ka bohona.

•Lipuisano tse Ikhethileng:Lihlopha tsa rona li tla u thusa ho khetha li-additives tse nepahetseng bakeng sa litlhoko tsa hau tse ikhethileng tsa tlhahiso.

•Tataiso ea Lihlahisoa le Lithuto tsa Nyeoe:Fumana kamoo li-additives tsa silicone tsa SILIKE li ka rarollang mathata a hau a ikhethang a tlhahiso.

Mohala:+86-28-83625089

Imeile: amy.wang@silike.cn

Webosaete: www.siliketech.com